Newsletter

For a Free Quote...

LANforge FIRE Traffic Generators

Candela LANforge-FIRE CT314

CT314 Low Power LANforge-FIRE Traffic Generator

The CT314 is a low-power and affordable applicance with a single 10/100 Ethernet port and one Broadcome 802.11b/g/n Wireless interface. It is targeted at users who wish to have an inexpensive appliance that can be left at remote sites for network monitoring and lower speed testing. The maximum throughput is about 90Mbps bi-directional wired. Wireless throughput is steady at 38Mbps and can peak at 48Mpbs. The CT314 is based on the Raspberry PI B version 3 platform, running the Ubuntu Server OS. While it is capable of displaying a Linux desktop and LANforge GUI, the CT314 omits these items to save resources in the default install. The CT314 has no moving parts and is about the size of a deck of cards. It has HDMI, USB Keyboard, and Mouse interfaces for easy console/desktop access to the system. VoIP support is priced separately. Please communicate your preferences to your sales representative. No additional hardware or software is required, but you need a separate PC to run the LANforge GUI for easy management of the LANforge system.

Learn More on Candela CTCandela FIRE Download CT314   

 

 

 
andela LANforge-FIRE CT502-1G

CT502-1G LANforge FIRE Traffic Generator with 6 ports and 250 Virtual Interfaces

The CT502-1G is an excellent choice for testing firewalls, routers and other devices that pay attention to network flows. The CT502-1G uses the MAC-VLAN feature in the Candela Linux kernel to emulate up to 250 virtual interfaces using a single physical ethernet interface. Each of the virtual interfaces has its own IP address, IP port space, MAC address and routing table. This allows one to configure all of the virtual interfaces on the same subnet or different subnets, depending on the testing requirements. When used with something like VoIP, it allows all of the VOIP calls to use the standard IP ports (with one call per virtual interface).

The CT502-1G 1U rackmount chassis fits into a standard rack and is only 14 inches deep. It supports standard VGA, Keyboard, and Mouse interfaces for easy console/desktop access to the system. The rackmount chassis is relatively noisy, so it is better for a data center deployment than a desktop environment. Other form factors better suited for traveling or desktop use are also available at similar prices and performance. This system includes the Armageddon feature and 6 physical ports at no additional charge. The VoIP feature are priced separately. Please communicate your preferences to your sales representative. No additional hardware or software is required, but you may wish to manage the system using the LANforge GUI on a separate machine.

Learn More on Candela CTCandela FIRE Download CT502-1G   

 

 
Candela LANforge-FIRE CT503

CT503 High-Speed LANforge-FIRE Traffic Generator

The CT503 is an excellent choice for testing high-performance networks and network components. The CT503 consists of a single 1U multi-core system with 8 10/100/1000 Ethernet interfaces. The system can generate and receive close to line speed on each port when using Armageddon and larger packet sizes. Other quantities of ports are available, and additional systems can be clustered for increased traffic generation capacity.

The CT503 1U rackmount chassis fits into a standard rack and is about 14 inches deep. It supports standard VGA, Keyboard, and Mouse interfaces for easy console/desktop access to the system. The rackmount chassis is relatively noisy, so it is better for a data center deployment than a desktop environment. Other form factors better suited for traveling or desktop use are also available at similar prices and performance. This system includes the Armageddon feature at no additional charge. VoIP and virtual interface support is priced separately. Please communicate your preferences to your sales representative. No additional hardware or software is required, but you may wish to manage the system using the LANforge-GUI on a separate machine.

Learn More on Candela CTCandela FIRE - Download CT503   

 

 
Candela LANforge-FIRE CT503

CT503-10G High-Speed LANforge-FIRE Traffic Generator

The CT503-10G is an excellent choice for testing high-performance networks and network components. The CT503-10G consists of a single 1U multicore-processor system with a dual 10 Gigabit Fiber NIC. The system can generate and receive almost 10 Gbps to itself (about 40 Gbps total across the backplane). 10 Gigabit CX4 Ethernet interfaces are available plus other quantities and types of interfaces. Additional systems can be clustered for increased traffic generation capacity.

The CT503-10G 1U rackmount chassis fits into a standard rack and is about 14 inches deep. It supports standard VGA, Keyboard, and Mouse interfaces for easy console/desktop access to the system. The rackmount chassis is relatively noisy, so it is better for a data center deployment than a desktop environment. Other form factors better suited for traveling or desktop use are also available at similar prices and performance. This system includes the 10 Gigabit Armageddon feature. VoIP and virtual interface support is priced separately. Please communicate your preferences to your sales representative. No additional hardware or software is required, but you may wish to manage the system using the LANforge GUI on a separate machine. 

Learn More on Candela CTCandela FIRE - Download CT503-10G   

 

 
Candela LANforge-FIRE CT503-MIX

CT503-MIX High-Speed LANforge-FIRE Traffic Generator

The CT503-MIX is an excellent choice for testing high-performance networks and network components. The CT503-MIX consists of a single LF1012 2U system with 12 1Gbps SFP and 2 10Gbps SFP+ Ethernet interfaces for traffic generation plus 2 more 10/100/1000 ports for remote management. The system can generate and receive about 24 Gbps (48 Gbps total across the backplane). All SFP modules are fiber by default: Contact your sales representative for a different mix of interfaces. This system includes the Armageddon feature at no additional charge.

The LF1012 2U rackmount chassis fits into a standard rack and is about 14 inches deep. It supports standard VGA, Keyboard, and Mouse interfaces for easy console/desktop access to the system. The rackmount chassis is relatively noisy, so it is better for a data center deployment than a desktop environment. Other form factors better suited for traveling or desktop use are also available. VoIP and virtual interface support is priced separately. Please communicate your preferences to your sales representative. No additional hardware or software is required, but you may wish to manage the system using the LANforge-GUI on a separate machine.

Learn More on Candela CTCandela FIRE - Download CT503-MIX   

 

 
Candela LANforge-FIRE CT570

CT570 LANforge FIRE Last-Mile Traffic Generator

The CT570 is an excellent choice for testing DSL, Cable-Modem and other configurations with many relatively low-speed endpoints generating traffic against a higher-speed core network. The CT570 uses a 1U rackmount LANforge machine and a managed ethernet switch supporting 802.1Q VLANs to provide 48 ports of 10/100 ethernet traffic generation. The system can generate and receive about 2Gbps (4Gbps total across the backplane). Other quantities of ports are available, and additional systems can be clustered for increased traffic generation capacity.

The CT570 1U rackmount chassis fits into a standard rack and is about 14 inches deep. It supports standard VGA, Keyboard, and Mouse interfaces for easy console/desktop access to the system. The ethernet switch is a standard managed ethernet switch and can be rack-mounted or used on the desktop. The LANforge rackmount chassis is relatively noisy, so it is better for a data center deployment than a desktop environment. Other form factors better suited for traveling or desktop use are also available at similar prices and performance. This system includes the Armageddon feature at no additional charge. VoIP support is priced separately. Please communicate your preferences to your sales representative. No additional hardware or software is required, but you may wish to manage the system using the LANforge-GUI on a separate machine.

Learn More on Candela CTCandela FIRE- Download CT570   

 

 
Candela LANforge-FIRE CT510-10G

CT510-10G High-Speed LANforge-FIRE File-IO Traffic Generator

The CT510-10G is an excellent choice for testing high-performance File-IO servers, such as NFS, CIFS and iSCSI. The CT510-10G consists of a single 1U multicore-processor system with a dual 10 Gigabit Fiber NIC. The system can read at least 15Gbps of data if the file server is fast enough. The CT510-10G supports up to 2000 concurrent File-IO connections. Each connection can be NFSv3, NFSv4 or CIFS. At least 10 concurrent iSCSI connections are supported. NFSv3, NFSv4 and CIFS supports IPv6. Each connection appears as a unique PC to the file server, with it's own MAC, IP, routing table, and File-IO transport session(s). Additional systems can be clustered for increased traffic generation capacity.

The CT510-10G 1U rackmount chassis fits into a standard rack and is about 14 inches deep. It supports standard VGA, Keyboard, and Mouse interfaces for easy console/desktop access to the system. The rackmount chassis is relatively noisy, so it is better for a data center deployment than a desktop environment. Other form factors better suited for traveling or desktop use are also available. VoIP, Armageddon and WanLink features are priced separately. Please communicate your preferences to your sales representative. No additional hardware or software is required, but you may wish to manage the system using the LANforge GUI on a separate machine.

Learn More on Candela CTCandela FIRE-Download CT510-10G   

 

 
Candela LANforge-FIRE CT505-100

CT505-30 LANforge-FIRE VoIP Call Generator

 The CT505-30 supports SIP VOIP calls, including RTP data-stream generation. It can make 30 calls to itself (60 VoIP soft phones) per chassis. The CT505-30 is excellent for testing whether or not an existing infrastructure can handle increased VoIP call load, and can also be used to test SIP gateways and other infrastructure. The CT505-30 uses the MAC-VLAN feature to allow one virtual interface per phone, so each phone can use a unique IP address and use standard SIP protocol ports. Normal LANforge-FIRE traffic generation features (Ethernet, UDP, TCP, HTTP, etc) is also supported by the CT505-30 at no additional charge. The PESQ automated quality scoring module is included.

The CT505-30 1U rackmount chassis fits into a standard rack and is only 14 inches deep. It supports standard VGA, Keyboard, and Mouse interfaces for easy console/desktop access to the system. The rackmount chassis is relatively noisy, so it is better for a data center deployment than a desktop environment. Other form factors better suited for traveling or desktop use are also available at similar prices and performance. More powerful systems are also available and multiple LANforge systems can be clustered together into a single managed realm for increased call capacity. No additional hardware or software is required, but you may wish to manage the system using the LANforge-GUI on a separate machine.

Learn More on Candela CTCandela FIRE-Download CT505-30   

 

 

Contact Us

Address:

Telnet Networks Inc.
100 Strowger Blvd, Suite 118, Brockville, ON, K6V 5J9, Canada

Phone:

(800) 561-4019

Fax:

613-498-0075

For More Information about Telnet Networks, our products, or our services, or to request a quote please feel free to contact us directly.

Latest Blog Posts

Latest Blog Posts (copy)