KeySight – IXIA Copper Network Taps

Ixia Copper Taps

Provide complete traffic visibility to copper links

Highlights

  • Passes all network traffic – not reliant on SPAN ports
  • LED shows power, speed, link and activity
  • Link Fault Detect prevents undetected network link failures
  • Aggregation tap – combine both directions of the monitored link into a single tool port

IxTap Standard Break Out Full Duplex Tap

Keysight Copper Taps provide network isolation, dropping any traffic that is accidentally or maliciously transmitted back onto the monitor ports. The copper taps are isolated from the network because they have no IP address, eliminating exposure to external attacks.

IxTap Standard Break Out Full Duplex Tap – cost efficient, light wait, high density tap for standard operations. Remote management and smart tap features are available. Available for 10/100/1000M

Ixia Copper Tap

Copper Tap Port Aggregator

Ixia Copper Tap

Copper Tap Port Aggregator – works as full duplex or port aggregation mode for 10/100/1000M speeds

Copper taps comes with optional accessories for rack mount and power chassis.

Keysight's 10/100/1000 Copper Tap Port Aggregator provide ultra-efficient access to critical links. This pioneering technology enables any two devices to simultaneously monitor a full-duplex link — using only one NIC per device.

Typically, full-duplex monitoring with a network tap requires two NICs, one interface for each side of the tapped full-duplex connection (or a dual channel NIC). The Copper Tap Port Aggregator combines and regenerates these streams, sending all aggregated data out two separate passive monitoring ports.

Simple to Deploy

Our Tap Port Aggregator is a simple plug-and-play solution addressing the fact that many monitoring systems, including most software based solutions, only offer a single channel NIC, limiting full-duplex visibility.

While adding a second NIC can help maintain data integrity and visibility, there is a trade-off in flexibility and ease-of-use. An operating system and NICs that enable binding are often required to achieve the same functionality of the Tap Port Aggregator. In contrast, the Tap Port Aggregator requires no additional components or configuration on the monitoring devices.

Security and Visibility

Without an IP address, monitoring devices are isolated from the network, dramatically reducing their exposure to attacks. However, the monitoring device connected to the Tap still sees all full-duplex traffic as if it were inline, including Layer 1 and Layer 2 errors.

Reliability

For extra uptime protection, our Taps offer redundant power connections. Should the primary power source fail, the Tap automatically switches to the backup power source.

Keysight Products

Contact Us

Address:

Telnet Networks Inc.
1324 Andersen Drive
Kingston, ON  K7P 0C6
Canada

Phone:

(800) 561-4019

Fax:

613-498-0075

For More Information about Telnet Networks, our products, or our services, or to request a quote please feel free to contact us directly.

Latest Blog Posts

Newsletter

Latest Blog Posts