Newsletter

For a Free Quote...

Candela LANforge-ICE Network Impairment Emulators

Candela LANforge-ICE

CT910 LANforge-ICE 45Mbps WAN Emulator

The CT910 is an excellent choice for a portable network emulator supporting speeds up to 45Mbps (bi-directional). It can insert latency, packet loss, bandwidth constraints, packet reordering, duplication and corruption, and other impairments in a controllable manner. The CT910 has no moving parts and will fit into a small travel bag or briefcase for easy portability. It is also completely silent, so you can include it in your customer demos and presentations. It should be managed by the LANforge-GUI running on a separate machine (laptop, etc). The CT910 can also be managed over a serial console in text mode. For more powerful systems, consider the CT913 or CT963.

Learn More on Candela CTCandela ICE - Download CT910   

 

 
Candela LANforge-ICE

CT913 LANforge-ICE 1Gbps WAN Emulator

The CT913 is an excellent choice for a portable network emulator supporting speeds up to 1Gbps (bi-directional). It can insert latency, packet loss, bandwidth constraints, packet reordering, duplication and corruption, and other impairments in a controllable manner. The CT913 has no moving parts and will fit into a small travel bag or briefcase for easy portability. It is also completely silent, so you can include it in your customer demos and presentations. It should be managed by the LANforge-GUI running on a separate machine (laptop, etc). The CT913 can also be managed over a serial console in text mode. For more powerful systems, consider the CT963.

Learn More on Candela CTCandela ICE - Download CT913   

 

 
Candela LANforge-ICE

CT920 LANforge-ICE 45Mbps WAN Emulator

The CT920 is an excellent choice for a portable network emulator supporting speeds up to 45Mbps (bi-directional). The CT920 has no moving parts and will fit into a small travel bag or briefcase for easy portability. It is also completely silent, so you can include it in your customer demos and presentations. Additional software licenses can enable additional WanLinks or higher-speed emulations for future upgrades. No additional hardware or software is required, but it is suggested that you manage the system using the LANforge-GUI on a separate machine. The CT920 can also be managed over a serial console in text mode.

Learn More on Candela CTCandela ICE - Download CT920   

 

 
Candela LANforge-ICE

CT922 LANforge-ICE 155 Mbps WAN Emulator

The CT922 is an excellent choice for a portable network emulator supporting speeds up to 155 Mbps (bi-directional). The CT922 will fit into a small travel bag or briefcase for easy portability. It is also completely silent, so you can include it in your customer demos and presentations. Additional software licenses can enable additional WanLinks or higher-speed emulations for future upgrades. No additional hardware or software is required, but it is suggested that you manage the system using the LANforge-GUI on a separate machine. The CT922 can also be managed over a serial console in text mode.

Learn More on Candela CTCandela ICE - Download CT922   

 

 
Candela LANforge-ICE

CT934 LANforge-ICE 1 Gbps Desktop WAN Emulator 8GB RAM

The CT934 is an excellent choice for a desktop or portable network emulator supporting speeds up to 980 Mbps (bi-directional) or 1 Gbps when traffic load is not maxed out in both directions. It comes standard with 8GB RAM to support multiple seconds of latency. The CT934 has no moving parts, so it is good for mobile work and desktop environments where a loud rackmount system is not desirable. It supports standard VGA, Keyboard, and Mouse interfaces for easy console/desktop access to the system. The CT934 hardware can support up to 3 simultaneous WAN emulations at near 1Gbps bi-directional throughput. Contact your sales representative if you prefer more than a single WAN emulation or LANforge-FIRE traffic generation feature sets. No additional hardware or software is required, but you may wish to manage the system using the LANforge-GUI on a separate machine.

Learn More on Candela CTCandela ICE - Download CT934   

 

 
Candela LANforge-ICE

CT962 LANforge-ICE 155Mbps WAN Emulator

The CT962 is an excellent choice for a 1U rack-mount network emulator supporting speeds up to 155Mbps (bi-directional). The CT962 fits into a standard rack and is only 14 inches deep. It supports standard VGA, Keyboard, and Mouse interfaces for easy console/desktop access to the system. The CT962 is relatively noisy, so it is better for a data center deployment than a desktop environment. The CT962 hardware can support up to 3 concurrent WAN emulations at 155Mbps. Contact your sales representative if you prefer more than a single WAN emulation. No additional hardware or software is required, but you may wish to manage the system using the LANforge-GUI on a separate machine.

Learn More on Candela CTCandela ICE - Download CT910   

 

 
Candela LANforge-ICE

CT963 LANforge-ICE 1Gbps WAN Emulator

The CT963 is an excellent choice for a 1U rack-mount network emulator supporting speeds up to 990Mbps (bi-directional) or 1Gbps when traffic load is not maxed out in both directions. The CT963 fits into a standard rack and is 14 inches deep. It supports standard VGA, Keyboard, and Mouse interfaces for easy console/desktop access to the system. The CT963 is relatively noisy, so it is better for a data center deployment than a desktop environment. The CT963 hardware can support up to 3 WAN emulations with aggregate bandwidth of about 1.6Gbps bi-directional. Contact your sales representative if you prefer more than a single WAN emulation. No additional hardware or software is required, but you may wish to manage the system using the LANforge-GUI on a separate machine.

Learn More on Candela CTCandela ICE - Download CT910   

 

 
Candela LANforge-ICE

CT964 LANforge-ICE 1Gbps WAN Emulator - 8GB RAM

The CT964 is an excellent choice for a 1U rack-mount network emulator supporting speeds up to 990Mbps (bi-directional) on multiple ports. The CT964 comes standard with 8GB RAM to support multiple seconds of latency. The CT964 fits into a standard rack and is 14 inches deep. It supports standard VGA, Keyboard, and Mouse interfaces for easy console/desktop access to the system. The CT964 is relatively noisy, so it is better for a data center deployment than a desktop environment. The CT964 hardware can support up to 4 WAN emulations with each emulation running at near 1Gbps bi-directional. Contact your sales representative if you prefer more than a single WAN emulation. No additional hardware or software is required, but you may wish to manage the system using the LANforge-GUI on a separate machine.

Learn More on Candela CTCandela ICE - Download CT910   

 

 
Candela LANforge-ICE

CT966 LANforge-ICE 10 Gbps WAN Emulator - 64-bit

The CT966 is an excellent choice for a 1U rack-mount network emulator supporting speeds up to 9.8 Gbps (bi-directional) traffic load on up to four 10 G ports (1500 byte packets). Regardless of packet size, the maximum rate is about 1.6 million packets per second in each direction according to measured performance metrics. The CT966 comes standard with 16GB RAM and a 3.5Ghz E5 v2 processor to support multiple seconds of latency at high speeds. The CT966 fits into a standard rack and is 14 inches deep. It supports standard VGA, Keyboard, and Mouse interfaces for easy console/desktop access to the system. The CT966 is relatively noisy, so it is better for a data center deployment than a desktop environment. No additional hardware or software is required, but you may wish to manage the system using the LANforge-GUI on a separate machine.

Learn More on Candela CTCandela ICE - Download CT910   

 

 
Candela LANforge-ICE

CT970-10 LANforge-ICE 10-port WAN Emulator

The CT970-10 is an excellent choice for affordable high-density WAN emulation. The CT970-10 is a set of 2 machines: One LANforge machine to do the WAN emulation and bridging, and an off-the-shelf managed ethernet switch supporting 802.1Q VLANs. The LANforge machine is a small appliance and the 24-port ethernet switch is a 1U rackmount unit. Neither unit has any moving parts, so they are a silent companion in the office! The user's stations plug into the ethernet switch and speak regular ethernet (no 802.1Q VLAN support is required in the devices-under-test.) The WAN emulation, bridging, and optional virtual router configuration is all managed through the LANforge-GUI. This same general configuration can support 16 and other amounts of WAN emulations: Contact your sales representative for pricing and configuration details.

Learn More on Candela CTCandela ICE - Download CT910   

 

 
Candela LANforge-ICE

CT970-16 LANforge-ICE 16-port WAN Emulator

The CT970-16 is an excellent choice for affordable high-density WAN emulation. The CT970-16 is a set of 2 machines: One LANforge machine to do the WAN emulation and bridging, and an off-the-shelf managed ethernet switch supporting 802.1Q VLANs. The LANforge machine is a small appliance and the 24-port ethernet switch is a 1U rackmount unit. Neither unit has any moving parts, so they are a silent companion in the office! The user's stations plug into the ethernet switch and speak regular ethernet (no 802.1Q VLAN support is required in the devices-under-test.) The WAN emulation, bridging, and optional virtual router configuration is all managed through the LANforge-GUI. This same general configuration can support 16 and other amounts of WAN emulations: Contact your sales representative for pricing and configuration details.

Learn More on Candela CTCandela ICE - Download CT910   

 

 
Candela LANforge-ICE

CT970-24 LANforge-ICE 24-port WAN Emulator

The CT970-24 is an excellent choice for high-density WAN emulation. The CT970-24 is a set of 2 machines: One LANforge machine to do the WAN emulation and bridging, and an off-the-shelf managed ethernet switch supporting 802.1Q VLANs. The LANforge machine is a 1U rackmount and the 24-port ethernet switch is a 1U rackmount unit. The user's stations plug into the ethernet switch and speak regular ethernet (no 802.1Q VLAN support is required in the devices-under-test.) The WAN emulation, bridging, and optional virtual router configuration is all managed through the LANforge-GUI. This same general configuration can support 24, 96 and other amounts of WAN emulations: Contact your sales representative for pricing and configuration details.

Learn More on Candela CTCandela ICE - Download CT910   

 

 
Candela LANforge-ICE

CT970-48 LANforge ICE 48-port WAN Emulator

The CT970-48 is an excellent choice for high-density WAN emulation. The CT970-48 is a set of 2 machines: One LANforge machine to do the WAN emulation and bridging, and an off-the-shelf managed ethernet switch supporting 802.1Q VLANs. The LANforge machine is a 1U rackmount and the 48-port ethernet switch is a 2U rackmount unit. The user's stations plug into the ethernet switch and speak regular ethernet (no 802.1Q VLAN support is required in the devices-under-test.) The WAN emulation, bridging, and optional virtual router configuration is all managed through the LANforge-GUI. This same general configuration can support 24, 96 and other amounts of WAN emulations: Contact your sales representative for pricing and configuration details.

Learn More on Candela CTCandela ICE - Download CT910   

 

 

Contact Us

Address:

Telnet Networks Inc.
100 Strowger Blvd, Suite 118, Brockville, ON, K6V 5J9, Canada

Phone:

(800) 561-4019

Fax:

613-498-0075

For More Information about Telnet Networks, our products, or our services, or to request a quote please feel free to contact us directly.